so i replaced a leaky hose and connectors with no problem so far (knock on wood)
some parts still squeak... i don't know if it has always squeaked or just because I am paying attention now or what
can I lube it up with some WD40?
the parts in specific I am talking about is the drive shaft for the belt motor, and the driveshaft for fan on the drain hose...
any help?
Posted by Blayne Bradley (Member # 8565) on :
Make sure to give suitable prayers to the Machine Spirit of the Washing Machine.
Posted by RivalOfTheRose (Member # 11535) on :
done and done
Posted by Blayne Bradley (Member # 8565) on :
That was a Warhammer 40,000 reference just to be clear.
Posted by TomDavidson (Member # 124) on :
How bad is the squeaking? You most certainly can spray the drives with some lubricant; it's unlikely to hurt, and might even help.
Posted by DSH (Member # 741) on :
Use a good quality spray lube, something with silicone, PTFE (teflon) or lithium in it. WD40 quickly evaporates and will require frequent re-application.