FacebookTwitter
Hatrack River Forum   
my profile login | search | faq | forum home

  next oldest topic   next newest topic
» Hatrack River Forum » Active Forums » Books, Films, Food and Culture » How do I dry a laptop?

   
Author Topic: How do I dry a laptop?
Blayne Bradley
unregistered


 - posted            Edit/Delete Post 
Basically I was cleaning a laptop screen with LCD screen cleaner and it seems a drop or 2 go into the screen case, it made a funny smell, and scary buzing noises. Any suggestions besides leave it off over night?
IP: Logged | Report this post to a Moderator
Kwea
Member
Member # 2199

 - posted      Profile for Kwea   Email Kwea         Edit/Delete Post 
is it still working at all? If so, I;d wait overnight. If not, take it to a tech place NOW.
Posts: 15082 | Registered: Jul 2001  |  IP: Logged | Report this post to a Moderator
Kwea
Member
Member # 2199

 - posted      Profile for Kwea   Email Kwea         Edit/Delete Post 
Hell, I'd wait to turn it back on until tomorrow, don't run any current thought it at all.
Posts: 15082 | Registered: Jul 2001  |  IP: Logged | Report this post to a Moderator
Blayne Bradley
unregistered


 - posted            Edit/Delete Post 
The computer part is fine, its the screen part that does the fuzzy stuff, I turned it off and put it away.
IP: Logged | Report this post to a Moderator
Xann.
Member
Member # 11482

 - posted      Profile for Xann.   Email Xann.         Edit/Delete Post 
Ideally i would spend about three days with it off, that is what i have heard about keyboards at least. Since that probably isn't possible i would just make sure to blow on it alot and hope for the best.
Posts: 549 | Registered: Feb 2008  |  IP: Logged | Report this post to a Moderator
King of Men
Member
Member # 6684

 - posted      Profile for King of Men   Email King of Men         Edit/Delete Post 
Put it in a microwave oven for about five minutes.
Posts: 10645 | Registered: Jul 2004  |  IP: Logged | Report this post to a Moderator
Blayne Bradley
unregistered


 - posted            Edit/Delete Post 
....


Your kidding.

Please tell me your kidding.

IP: Logged | Report this post to a Moderator
Noemon
Member
Member # 1115

 - posted      Profile for Noemon   Email Noemon         Edit/Delete Post 
Personally, I'd have left it on (if I had the presence of mind to do so; my kneejerk reaction would probably be to power it down). I've had better luck with leaving electronics on while they dry than I have with getting them to come back up and run properly after drying out while off.
Posts: 16059 | Registered: Aug 2000  |  IP: Logged | Report this post to a Moderator
King of Men
Member
Member # 6684

 - posted      Profile for King of Men   Email King of Men         Edit/Delete Post 
Not at all. Don't you know how a microwave works? It sends out electromagnetic waves whose frequency is close to the resonance frequency of water molecules; as it happens this is in the micrometer range, hence the name. The transfer of energy from the wave to water molecules is therefore huge, while the transfer to almost anything else is so-so. Therefore a microwave will make the water in your case evaporate without destroying the electronics, which won't absorb much energy.
Posts: 10645 | Registered: Jul 2004  |  IP: Logged | Report this post to a Moderator
The Genuine
Member
Member # 11446

 - posted      Profile for The Genuine           Edit/Delete Post 
[Evil Laugh]
Posts: 158 | Registered: Jan 2008  |  IP: Logged | Report this post to a Moderator
King of Men
Member
Member # 6684

 - posted      Profile for King of Men   Email King of Men         Edit/Delete Post 
Well, I don't know what that's supposed to mean. My explanation of how microwave ovens work is quite correct. Now, if I had suggested he dry a cat off by putting it in the microwave, that would be moderately evil. But laptops, unlike cats, are not 80% water. So it is quite safe.
Posts: 10645 | Registered: Jul 2004  |  IP: Logged | Report this post to a Moderator
Blayne Bradley
unregistered


 - posted            Edit/Delete Post 
buuuut I've seen metal spoons explode in microwaves.

Don't laptops have... metal in them?

The problem with keeping it on is that I think it would have been it worse as the screen was not only making a wierd noise but was flickering on and off and made a really bad melted plastic smell.

Also when I tried to turn it back on an hour later the backlite didn't seem to turn on right away*, the buzzing resumed when I plugged the power supply in.

*It turned on in a way when plugged it, with resumed flickering.

IP: Logged | Report this post to a Moderator
King of Men
Member
Member # 6684

 - posted      Profile for King of Men   Email King of Men         Edit/Delete Post 
Oh, well, now that you mention it, it is true that metals are one of the few things other than water that are really good at absorbing energy from microwaves. (Or electromagnetic waves of any wavelength, really; it's because they are conductors and the electric fields make the electrons move about.) But nevertheless, the following facts are true:

* The microwave would certainly dry out the laptop.
* Water absorbs microwave energy very well, and this is the principle by which microwave ovens work.
* Putting cats in microwaves is evil.
* Putting laptops in microwaves is quite safe, in that no people would be hurt; property damage only.
* And finally, the Canadian economy needs consumer stimulus just as much as the American one. Only trying to help!

So you see, I did not make any false statements.

Posts: 10645 | Registered: Jul 2004  |  IP: Logged | Report this post to a Moderator
Orincoro
Member
Member # 8854

 - posted      Profile for Orincoro   Email Orincoro         Edit/Delete Post 
KoM, you of all people should be aware that Blayne is vulnerable to such psychological attacks.

Hell, for a minute there I was thinking about how you might be right- except I couldn't get over the whole arcing electricity thing.

Incidentally I once spilled an entire liter of boiling hot tea on a dell laptop.

I set it on its side (screen open) for two days, turned it back on, and it was just fine.

I've been told that water with few impurities has little effect on electronic components unless there is current. Thus, one possible way of curing a small electronic device of water infestation is to submerge it in an oil solution like WD-40. The oil forces out the water (since they don't mix) and then evaporates. This is only in cases where dirty or muddy water (ie, corrosive liquid) is involved.

Posts: 9912 | Registered: Nov 2005  |  IP: Logged | Report this post to a Moderator
MattP
Member
Member # 10495

 - posted      Profile for MattP   Email MattP         Edit/Delete Post 
It sounds like Blayne got some water into the inverter circuit that powers the LCD backlight. That's the only high frequency component in the display area which is prone to make a buzzing noise.

If it were mine, I'd power it off and VERY carefully remove the bezel around the display in order to get to the liquid. Dab up any visible wetness with a clean cloth or paper towel and then leave it open to the air overnight. After that, put it back together and turn it on again.

Posts: 3275 | Registered: May 2007  |  IP: Logged | Report this post to a Moderator
MattP
Member
Member # 10495

 - posted      Profile for MattP   Email MattP         Edit/Delete Post 
quote:
I've been told that water with few impurities has little effect on electronic components unless there is current.
Water kills electronics two different ways - by creating electrical shorts and by corroding metalic components. Water with few impurities, such as distilled water, will not cause shorts but the risk of corrosion is still there if you don't get it dried out fairly quickly.
Posts: 3275 | Registered: May 2007  |  IP: Logged | Report this post to a Moderator
Blayne Bradley
unregistered


 - posted            Edit/Delete Post 
quote:
Originally posted by MattP:
It sounds like Blayne got some water into the inverter circuit that powers the LCD backlight. That's the only high frequency component in the display area which is prone to make a buzzing noise.

If it were mine, I'd power it off and VERY carefully remove the bezel around the display in order to get to the liquid. Dab up any visible wetness with a clean cloth or paper towel and then leave it open to the air overnight. After that, put it back together and turn it on again.

This would probably void the warranty on said laptop.
IP: Logged | Report this post to a Moderator
Starsnuffer
Member
Member # 8116

 - posted      Profile for Starsnuffer   Email Starsnuffer         Edit/Delete Post 
Ah, I was going to ask why not just let it sit and dry until it is dried.
Posts: 655 | Registered: May 2005  |  IP: Logged | Report this post to a Moderator
MattP
Member
Member # 10495

 - posted      Profile for MattP   Email MattP         Edit/Delete Post 
quote:
This would probably void the warranty on said laptop
Spilling liquid on a laptop has the same effect.
Posts: 3275 | Registered: May 2007  |  IP: Logged | Report this post to a Moderator
Blayne Bradley
unregistered


 - posted            Edit/Delete Post 
Not spilt, I was cleaning the screen as per instructions.
IP: Logged | Report this post to a Moderator
MattP
Member
Member # 10495

 - posted      Profile for MattP   Email MattP         Edit/Delete Post 
I'd be very surprised if the laptop included screen cleaning instructions that suggested spraying the screen with a liquid substance. Perhaps the cleaner instructions say that...
Posts: 3275 | Registered: May 2007  |  IP: Logged | Report this post to a Moderator
Orincoro
Member
Member # 8854

 - posted      Profile for Orincoro   Email Orincoro         Edit/Delete Post 
Ah, well then, leave the cleaner out over night until it is dried, and then attempt to turn it back on. If this does not work, put the cleaner in the microwave.
Posts: 9912 | Registered: Nov 2005  |  IP: Logged | Report this post to a Moderator
Teshi
Member
Member # 5024

 - posted      Profile for Teshi   Email Teshi         Edit/Delete Post 
Just let it dry in a warmish dry place before you do anything else more drastic.
Posts: 8473 | Registered: Apr 2003  |  IP: Logged | Report this post to a Moderator
The Rabbit
Member
Member # 671

 - posted      Profile for The Rabbit   Email The Rabbit         Edit/Delete Post 
I'd leave the laptop off but open. It might help to direct a fan on it but absolutely do not apply any heat. Warm room air is OK but don't set it in front of a heater or a fireplace, use a hair dryer on it or anything like that. Heat will damage the LCDs and possibly other components.

If letting it sit by a fan for a day doesn't help and it is still under warranty -- take it to a shop and let them open it up to dry out.

Posts: 12591 | Registered: Jan 2000  |  IP: Logged | Report this post to a Moderator
MattP
Member
Member # 10495

 - posted      Profile for MattP   Email MattP         Edit/Delete Post 
quote:
If letting it sit by a fan for a day doesn't help and it is still under warranty -- take it to a shop and let them open it up to dry out.
If it is still under warranty, then there's a good chance that the warranty will end the moment you tell the shop staff that you got liquid inside the bezel. In general you only take the laptop to the shop if a) the warranty has already been voided and you're going to pay for the repair, or b) the warranty is in effect and you are confident/hopeful that the shop will not detect any warranty-voiding damage or tampering.
Posts: 3275 | Registered: May 2007  |  IP: Logged | Report this post to a Moderator
The Rabbit
Member
Member # 671

 - posted      Profile for The Rabbit   Email The Rabbit         Edit/Delete Post 
quote:
If it is still under warranty, then there's a good chance that the warranty will end the moment you tell the shop staff that you got liquid inside the bezel.
I certainly wouldn't tell them you got liquid under the bezel. Tell them, "My screen started making this buzzing sound, can you check it out?" If they ask when the problem started, say " Monday". If they ask what you were doing when it start, say "I was cleaning the screen as per instructions with highly recommended cleaner X."

If they find evidence of liquid inside the machine when they open it up they may ask you if you spilled something on it, at which point you say "No never", I did use some liquid LCD cleaner on the screen but other than that there has never been any liquid anywhere near it.

And certainly, let it sit for a day in front of a fan before you try anything else.

Posts: 12591 | Registered: Jan 2000  |  IP: Logged | Report this post to a Moderator
scifibum
Member
Member # 7625

 - posted      Profile for scifibum   Email scifibum         Edit/Delete Post 
Or just admit you broke it and only attempt to get warranty service if that situation is covered.
Posts: 4287 | Registered: Mar 2005  |  IP: Logged | Report this post to a Moderator
MattP
Member
Member # 10495

 - posted      Profile for MattP   Email MattP         Edit/Delete Post 
quote:
Originally posted by scifibum:
Or just admit you broke it and only attempt to get warranty service if that situation is covered.

Your ideas intrigue me and I would like to subscribe to your newsletter.
Posts: 3275 | Registered: May 2007  |  IP: Logged | Report this post to a Moderator
Orincoro
Member
Member # 8854

 - posted      Profile for Orincoro   Email Orincoro         Edit/Delete Post 
quote:
Originally posted by Teshi:
Just let it dry in a warmish dry place before you do anything else more drastic.

PSH, that's just stupid. You're a stupid person, obviously. What's needed is a steamy bathroom, preferably with incense burning. The hotter and wetter, the better. After all, when it's steamy, it's because there's liquid in the air, and why is there liquid in the air...? Because it evaporates when it's steamy!

Also witches are made of ducks.

Posts: 9912 | Registered: Nov 2005  |  IP: Logged | Report this post to a Moderator
Kwea
Member
Member # 2199

 - posted      Profile for Kwea   Email Kwea         Edit/Delete Post 
lol


I don;t see any issue with going in and telling them it made noiae, myself, as Blayne didn;t spill anytihng and only assuming he got liquid in the case. It;s probable, but he doesn't now that fir sure, and he MAY have even been using the product as recommended.


Don't lie, just answer any questions asked honestly and you may be surprised. If you were spraying as recommended (which I honestly doubt, as most products say to spray the cleaning cloth directly, not the screen for this very reason) and it caused this it MAY still be covered.


Let us know if it works when dried out, I am curious. I just bought a laptop myself, and wonder if that will work. [Big Grin]

Posts: 15082 | Registered: Jul 2001  |  IP: Logged | Report this post to a Moderator
scifibum
Member
Member # 7625

 - posted      Profile for scifibum   Email scifibum         Edit/Delete Post 
I think the real lesson is that just because a product exists (e.g. LCD cleaning solution) doesn't mean it's a good idea to use it.

Baby products might be the best example of this principle.

Posts: 4287 | Registered: Mar 2005  |  IP: Logged | Report this post to a Moderator
rivka
Member
Member # 4859

 - posted      Profile for rivka   Email rivka         Edit/Delete Post 
True.

You know, I added water to baby powder lots of times, and not ONCE did I get a baby?

Posts: 32919 | Registered: Mar 2003  |  IP: Logged | Report this post to a Moderator
   

   Close Topic   Feature Topic   Move Topic   Delete Topic next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:


Contact Us | Hatrack River Home Page

Copyright © 2008 Hatrack River Enterprises Inc. All rights reserved.
Reproduction in whole or in part without permission is prohibited.


Powered by Infopop Corporation
UBB.classic™ 6.7.2