I don't know if there is an easy fix to this or not. If not, please don't waste your time on it -- I'll figure something else out.
I somehow set my portable USB drive to "read only." Now I cannot write onto it from any computer. Also, some of the computers I use will recognize it's there when I plug it in, and others are all "Removable drive? What drive? I don' see no drive."
(I did make sure I was plugging it in at the right place and the right way, so far as I can tell.)
Ideas? Comments? Laughter coupled with pointing fingers?
posted
What brand/model is it? Have you tried the manufacturer's website, knowledge base and/or documentation?
Posts: 4313 | Registered: Sep 2004
| IP: Logged |
posted
If you're running a PC, plug the drive in, open windows explorer, right click any of your drives (your hard drive or CD drive will work, too), click "properties," click the Hardware tab, and let me know what your flash drive is labeled - that will usually give you a clue as to the manufacturer, as well as the model number.
Alternately, if you remember where you bought it (online hopefully!) and/or have the receipt, that can also help a ton.
Posts: 4313 | Registered: Sep 2004
| IP: Logged |
posted
I always, hmmm ... disengage? ... the drive before pulling it out. This time, I did the usual clicks to get to the "X is now safe to remove" prompt, but it never came up. I kept trying to get it to tell me it was safe to eject, but the computer wouldn't say it. So I rebooted the computer, and now my lil guy is a ghost.
---
Thanks, erosomniac! I will do that tomorrow. (I have to give the laptop to my spouse now.) I've also bookmarked this thread, accessed via Googlefu, which may be of help.
Summary/Translation:
quote:I have a GXT Mobile Disk USB 2.0 2gig flash drive (aka USB Key, Memory Stick, etc.)
It has begun to act rather odd. It will only mount with the read/write switch in "read only" mode. Plugging it in with the switch in Read/Write mode results in no mounted disk, although the Disk Utility does see it, but can't eject it. The System Profiler does see it.
Other USB flash drives are recognized instantly (tried two others, different brands). ...
Blah-blah-blah---numbers---words---blah-blah-- --words that sounds vaguely familiar--noises-static--then:
quote: FIXED
Sometimes perseverence pays off...
Found this HP Drive Key Boot Utility (http://h18000.www1.hp.com/support/files/serveroptions/us/download/23839.html) (45 megs, Windows program). Hooked my "dead" USB stick to my roommate's old Windows machine, and I was able to reformat it on the first shot.
NOTE that although the utility is for HP-branded memory sticks, it apparently works with several kinds of USB flash drives. So - if you have a dead drive laying around, give it a shot!
posted
I can't find anything on GXT (the first thirty results googling "GXT Mobile" are eBay listings for the flash drive, which is not a good sign), so my original suggestion may be moot. It sounds like you found a thread with a workable solution though, so fingers crossed!
Posts: 4313 | Registered: Sep 2004
| IP: Logged |
posted
I don't mean to sound like an underestimating jerk, but sometimes there is a teeny little switch on the drive, that inadvertently gets switched. I have seen it happen to at least two people, but with a different brand.
No one ever notices it.
*apologizes in advance.
Posts: 883 | Registered: Aug 2005
| IP: Logged |
posted
Shan, when you have one hooked up there should be a small image with a green arrow on your screen, bottom right, near the clock. It is highly recommended that you click on it (and follow the directions) before removing the key drive.
OTOH, my daughter rarely remembers, and the drive she uses still works just fine and she has lost no data.
Posts: 32919 | Registered: Mar 2003
| IP: Logged |
posted
Probably. I'd imagine that shutting down the computer would tend to disengage the connection.
Posts: 32919 | Registered: Mar 2003
| IP: Logged |